Mokhoa oa ho Khetha Pakeng tsa Letoto la 20/30/35: Liqeto tse Tharo tsa Bohlokoa
Bophara ba sebaka bo khetholla sistimi ea lisebelisoa:Li-slots tsa 6mm, 8mm le 10mm ha li fetoloe — hang ha bophara ba sekotjana bo se bo behiloe, litlhaloso tsa li-T-nuts le li-bracket tsa likhutlo lia notleloa.
Karolo e tšekaletseng le motsotso oa inertia li khetholla bokhoni ba mojaro:Ha karolo e tshekaletseng e le kgolo mme motsotso o kopaneng wa inertia (Ix/Iy) o phahame, kganyetso ya ho kobeha e ba matla le ho feta.
Kopo e beha ntlha ea qalo:Mabone a koaletsoeng a hloka letoto la 20, liforeimi tse tloaelehileng bakeng sa letoto la 30, le meaho e boima bakeng sa letoto la 35.
Sistimi ea Bophara ba Slot: 6mm / 8mm / 10mm le ho lumellana ha lisebelisoa
Bophara ba sebaka ke ntlha ea ho kena ha ho khethoa sistimi ea extrusion ea aluminium.Sebaka sa 6mme sebelisoa haholo-holo likopanong tsa foreimi tse bobebe;Sebaka sa 8mmke boemo ba merero e akaretsang, bo nang le litlhaloso tsa sehokelo sa bohareng le bokgoni ba mojaro;Sebaka sa 10mmke ea lekala le boima, le sebelisetsoang likopano tsa foreimi ea sebopeho tse nang le khatello e phahameng, matla a phahameng le meroalo e boima. Hang ha bophara ba sebaka bo tsitsitse, li-T-bolts tse tsamaellanang, linate le li-bracket tsa sekhutlo li notlelloa kahare - liprofaele le lisebelisoa li lokela ho rekoa ka bophara bo tšoanang ba sebaka le sistimi e tšoanang.
Litlhaloso tsa Boemeli ba Letoto la 20/30/35
Litlhaloso tse ka tlase li nkiloe ho tsoa ho khataloge ea e-ea Chengdu E&I Aluminium:
| Mohlala | Boima ba 'mele | Tšebeliso e Tloaelehileng |
|---|---|---|
| E&I-6-2020 | 0.65 kg/m | Liforeimi tse bobebe, likoti tse nyane |
| E&I-6-2035 | 1.267 kg/m | Li-bracket tse bobebe tse nang le liphanele |
| E&I-8-3030 | 1.05 kg/m | Liforeimi tse tloaelehileng tsa lisebelisoa |
| E&I-6-3030LA | 1.087 kg/m | Likarolo tse bobebe le tšireletso |
| E&I-8-3040 | 1.55 kg/m | Liforeimi tse tlas'a meroalo e phahameng |
| E&I-8-3060 / E&I-8-3090 | 2.0 / 2.71 kg/m | Mabala a otlolohileng, a likarolo tse kholo |
| E&I-8-30120 / E&I-8-30150 | 3.899 / 8.6 kg/m | Mehaho e melelele, e nang le moroalo o boima |
| E&I-10-3535 | 1.55 kg/m | Litšehetso tse matla le tse nang le khatello e phahameng |
| E&I-8-3570 | 2.657 kg/m | Libalaka tse boima le tse otlolohileng |
| E&I-10-3580 | 1.997 kg/m | Libalaka tse kholo tsa liforeimi tse boima |
Thepa le Qetello ea Bokaholimo: 6063-T5 le Anodizing
6063-T5ke mocheso o tloaelehileng o phekoloang ka mocheso bakeng sa li-extrusion tsa aluminium tsa indasteri, ho leka-lekanya ho tlosoa ha motlakase le matla, 'me o loketse hantle meaho ea mofuta oa foreimi; 6082-T5 e ka nahanoa bakeng sa lits'ebetso tsa mojaro o boima kapa khatello e phahameng. Bakeng sa qetello ea bokaholimo, liprofaele lia sebelisoa.e hloekisitsoengho etsa filimi e teteaneng ea oxide e ntlafatsang ho hanyetsa mafome. Qetello ke satin e tšoeu-tšoeu 'me e ka boela ea dauoa ho fihlela moriting o itseng, e leng se etsang hore e lokele libaka tse mongobo, tse lerōle le tsa kantle.
Mehato ea Khetho: Notlela Tlhaloso ka Mehato e Meraro
Tlhahisoleseling ea Mofani
Chengdu E&I Aluminium Industry Co., Ltd.e kene lefapheng la ho ntša aluminium ea indasteri ka 2011 'me e bile indastering ka lilemo tse 15. Semela sa eona se akaretsa sebaka se fetang 3,000 m², 'me bokhoni ba eona ba selemo le selemo ba ho sebetsa bo feta lithane tse 1,000 tsa ho ntša aluminium ea indasteri.
Khamphani e fana ka lits'ebeletso tsa moralo, ts'ebetso le kopano ea sebaka se le seng, 'me e ka phethela lipalo tsa khetho, ho seha le ho kopanya foreimi ho tsoa litšoantšong tsa bareki. E sebelelitse lik'hamphani tse kangChanghong, BOE, HKC le Haier.
LBH
P1: Ke lits'ebetso life tse loketseng ho sebelisoa ha extrusion ea aluminium ea letoto la 20?
K: Letoto la 20 le sebelisa sekoti sa 6mm se boima ba 0.65 ~ 1.267 kg/m, se se beha boemong bo bobebe. Se loketse dikoahelo tsa disebediswa, di-bracket tsa disebediswa le tshireletso.
P2: Letoto la 30 le tla ka mefuta ea li-slot tsa 6mm le 8mm. Nka khetha joang?
K: Khetha ho latela sistimi ea lisebelisoa le maemo a mojaro: Mefuta ea li-slot tsa 6mm e sebelisoa haholo bakeng sa likarolo tse bobebe, ha mefuta ea li-slot tsa 8mm e sebelisoa bakeng sa liforeimi tse tloaelehileng tsa lisebelisoa.
P3: Ke lokela ho khetha letoto la 35 neng?
K: Bakeng sa lits'ebetso tse nang le khatello e phahameng, tse nkang nako e telele joalo ka liroboto tse phahamisitsoeng le liforomo tse jarang mojaro tse nang le maemo a mangata, letoto la 35 lea khothaletsoa.
P4: Bolelele bo tloaelehileng ba liprofaele ke bofe, hona na li ka khaoloa ho latela boholo?
K: Bolelele bo tloaelehileng ke 6.02 m. Liprofaele li ka sehoa le ho phunngoa ho latela litšoantšo tsa bareki, 'me moralo oa sebaka se le seng, ts'ebetso le phano ea kopano le tsona lia fumaneha.
P5: Anodizing e etsa eng?
K: Anodizing e etsa filimi e teteaneng ea oxide holim'a profil, e ntlafatsang ho hanyetsa ho bola le ho hanyetsa ho tsofala. Qetello ke satin e tšoeu joaloka silevera.
P6: Na disebediswa di ka arolelanwa pakeng tsa GB le diprofaele tse tloaelehileng tsa slot tsa Europe?
K: Ha e kgothaletswe. Ditsamaiso tsena tse pedi di fapana ka boholo ba di-slot le dintlha tse ding tsa sesebediswa, kahoo projeke e le nngwe e lokela ho sebedisa sistimi e le nngwe ya di-slot le bophara ba di-slot tse le nngwe.
Nako ea poso: Mphalane-13-2026